10,000 ft² in 11 hours, IECHO leather cutting production line

12. 10, 2020

This machine is a new version of leather cutting production line, mainly used in the cutting of leather materials for sofas, mattresses. Taking the sofa industry for example, it takes about 3 minutes from loading to collecting each leather piece. It can cut 10,000 square feet of leather in 11 hours.

DSC_0007.jpg


The machine is composed of two 3500X3200mm tables. One table is used for scanning and nesting, and the other table is used for cutting. There is a 1 meter feeding / collection table at the front and rear, plus an automatic conveyor system for a total of 9.5 meters.


微信图片_20201130101657.jpg

There is a high definition camera above the table of this machine to quickly scan the material, and recognize the marks made in advance on the leather material, intelligently classify each part of the material, and use it as differentiated parts of the product, even the severely wrinkled part can be used at the bottom of the product or the back, which greatly improves the utilization of leather.


10,000 ft² in 11 hours, IECHO leather cutting production line

While scanning, the material information is also feed back to the three monitors at the rear. The three computers are responsible for data analysis of scanned materials, editing of material data, and monitoring of the cutting process, allowing users to better monitor the entire production process.


微信图片_202012081710142.jpg

This machine adopts a dual beam design, with 2 beams working together, the cutting efficiency is 1.7 times than a single beam.


DSC_0033.JPG

This machine uses the latest high-frequency oscillating tool developed by IECHO, which is specially used for cutting leather materials and adopts Swiss motor. The maximum cutting speed can reach 1.5m/s, the highest frequency can be 28000 rpm and the acceleration is to 0.6-0.8 m/s².  With S-type surround cooling device inside, we use compressed air to cool the motot to ensure its long-term stability. The high-frequency oscillating tool uses a special L-shaped blade. Compared with ordinary blades, it can reduce the damage of the felt caused by high-intensity vibration during the cutting process.

DSC_0026.JPG

In the end, This machine uses an automatic conveyor system, which can automatically complete most of the work in production, which greatly saves labor costs. At the same time, this machine is equipped with a cleaning brush roll that can clean up the waste of materials when collecting.

DSC_0041.JPG

Hangzhou IECHO Science&Technology Co., Ltd No.1 Building, No.1 Weiye Road, Binjiang District, Hangzhou, China, 310053. 

Email:info@iechosoft.com

Web: http://de.iechocutter.com




PRODUKTFINDER

FINDEN SIE DEN SCHNEIDER, DER ZU IHNEN PASST

IECHO-Fräser sind vollständig modular aufgebaut, die Konfigurationsmöglichkeiten nahezu unbegrenzt. Mit dem Product Finder finden Sie schneller, wonach Sie suchen.

Starten Sie die Produktsuche

1 3

Was sind die Abmessungen Ihrer Materialien?

Länge
<1000
<1300
<1800
<2500
>2500
Breite
<600
<1300
<1600
<2200
>2200
2 3

Welche Materialien verarbeiten Sie?

Wählen Sie Ihre Anwendung (en) aus der Liste aus

Wellpappe
Papier
Pappe
Holz
Vinyl
Acryl
Schaum
Textil
PU
Leder
Kunststoff
Faser
3 3

Was ist Ihr Anwendungsgebiet?

Bekleidung
Autoinnenausstattung
Schilder & Grafiken
Verpackung
Polstermöbel
Verbundwerkstoffe
Sonstige

Wir haben noch nicht den perfekten Cutter für Sie gefunden.

Kontaktieren Sie uns direkt!

Hangzhou IECHO Science&Technology Co., Ltd.

IECHO

Bei Fragen stehen wir Ihnen gerne zur Verfügung

Produktfinder